Quick answer: Lady face pattern buttons are round, matte black resin buttons with an engraved lady-face (woman silhouette) design and a classic four-hole sew-through back. They come in four sizes — 22mm, 25mm, 28mm and 30mm — with six buttons per pack. Their sculptural, vintage-inspired face turns a plain closure into an artistic detail on coats, cardigans, blazers and DIY projects.
Looking for buttons with real character rather than a plain disc? Lady face pattern buttons carry an engraved portrait — a refined lady-face, or woman silhouette — in matte black resin, so a single button reads like a small piece of sculpture on a coat or blazer. The matte black finish keeps the look elegant and timeless, the engraved design catches the light, and the classic four-hole back makes them quick and secure to sew. This buying guide explains what lady face pattern buttons are, the sizes available, how they attach, how to choose the right size and how to care for them, so you can add them to your next project with confidence.
At a Glance
- Material: Durable resin in a matte black finish
- Type: Four-hole sew-through button (two pairs of holes on the front)
- Design: Engraved lady-face (woman silhouette) portrait on a round face
- Color: Black
- Sizes: 22mm, 25mm, 28mm and 30mm
- Sold: 6 buttons per pack
- Best for: Coats, cardigans, sweaters, blazers, jackets, dresses and DIY sewing
- Wholesale: Available for bulk and trade orders, factory-direct
What Are Lady Face Pattern Buttons?
Lady face pattern buttons are decorative buttons with an engraved portrait — a refined lady-face, or woman silhouette — set into a round, matte black face. They are made from durable, lightweight resin, so each button feels smooth and hard-wearing while showing off the detailed design. The lady-face pattern is a generic, vintage-inspired decorative motif, not a brand or logo, which makes it a versatile, artistic choice for elevating plain garments. Each button has four holes on the front for sewing, comes in four sizes from 22mm to 30mm, and is sold in packs of six.
How Do Resin Lady Face Buttons Attach?
These are four-hole sew-through buttons, so they attach in the classic way: you stitch through the four holes on the front of the button and into the fabric. This is the most familiar button style, easy for beginners and secure for everyday wear. You can sew them with a simple parallel stitch or a crossed (X) stitch through the holes, depending on the look you want. Because the holes sit within the design, the button lies neatly against the garment, and the matte black resin hides small marks and fingerprints well.
What Do Resin Lady Face Buttons Look Like?
Each button is a round disc of matte black resin with an engraved lady-face design across the surface. The matte black finish is elegant and timeless, and the sculpted portrait gives each button an artistic, vintage feel that stands out from plain round buttons. Because black pairs with almost any fabric, the buttons are easy to match — they look sharp on camel, cream, grey and jewel tones, and blend cleanly into black and navy garments. The larger 28mm and 30mm sizes make the design a real focal point, while the 22mm and 25mm sizes keep it more subtle.
Why Choose Resin Lady Face Buttons?
Resin lady face buttons are an easy, affordable way to give a plain garment an artistic, sculptural detail. The engraved portrait feels considered and unusual, the matte black finish keeps the look elegant and versatile, and because they use a classic four-hole back, they are quick and secure to sew. They are a great way to upgrade a plain coat, refresh a favorite cardigan, or add a distinctive detail to a handmade jacket — and with six buttons per pack, you have enough for most coats and cardigans. For makers and sellers, that mix of low cost, standout design and wide use makes them easy to stock and recommend.
How Do You Choose the Right Resin Lady Face Buttons?
Style and Placement
Because the engraved face is the star, these buttons work beautifully where they can be seen — down the front of a coat, blazer or cardigan, or as a single statement button on a jacket. They also make striking decorative accents on bags, cushions and craft projects. The matte black finish keeps them elegant, so they suit both classic tailoring and modern, artistic pieces.
Size and Fit
They come in four sizes, so check that the size suits both your buttonhole and the weight of your fabric. The 22mm and 25mm buttons are a good fit for cardigans, shirts and lighter jackets, while the larger 28mm and 30mm make a bold statement on coats, blazers and outerwear. If you are replacing existing buttons, measure the old button and your buttonhole first so the new ones fasten easily and sit flush.
Quantity
Work out how many buttons your project needs and add a spare or two. Each pack contains six buttons, which covers most coats and cardigans; for a longer coat or a bigger project, buy an extra pack so every button matches.
How Do You Sew On Resin Lady Face Buttons?
- Thread a needle with a double length of matching thread and knot the end.
- Mark the spot for the button and bring the needle up through the fabric from the back.
- Pass the needle down through one of the front holes, then up through the hole diagonally or directly opposite.
- Repeat through all four holes several times to form a parallel or crossed (X) stitch, keeping the tension even.
- To allow room for thicker fabric, place a matchstick or pin across the top of the button while stitching, then remove it and wind the thread a few times around the stitches underneath to form a neat shank.
- Knot off on the wrong side of the fabric and trim the thread.
How Do You Care for Resin Lady Face Buttons?
Resin buttons are hard-wearing and low-maintenance, but a little care keeps them looking their best. They can usually be machine washed on a gentle cycle, but avoid very hot water, tumble drying on high heat, bleach and harsh solvents, which can dull or warp the resin over time. To protect the finish, wash garments inside out or inside a laundry bag, and iron around the buttons rather than directly over them. Wipe the buttons with a soft, damp cloth if needed, and store spare buttons in a small pouch or box so the engraved design stays clean and sharp.
Frequently Asked Questions
What is the design on lady face pattern buttons? Each button has an engraved lady-face — or woman silhouette — portrait, a generic, vintage-inspired decorative motif rather than a brand or logo.
What are they made of? They are made from durable, lightweight resin in a matte black finish. They are not made from metal.
Are these shank or sew-through buttons? They are four-hole sew-through buttons: you stitch through the four holes on the front to attach them, just like a classic round button.
What sizes are available? They come in four sizes: 22mm, 25mm, 28mm and 30mm.
How many buttons are in a pack? Each pack includes six matching buttons, ready for sewing, repairs and craft projects.
Can I buy resin lady face buttons in bulk? Yes. They are available for wholesale and bulk orders with trade pricing, alongside single packs for home use.
What can I use them for? Coats, jackets, blazers, cardigans, sweaters, dresses, bags and all kinds of DIY sewing and craft projects.
Rule of Thumb
Let the engraved design take center stage by using these buttons where they can be seen, pick the size for the effect you want (22–25mm for a subtle touch, 28–30mm for a bold statement), and match the size to your buttonhole and fabric weight. Because they are classic four-hole buttons in durable resin, they are simple to sew and hard-wearing enough for everyday use.
Where to Buy
Ready to add an artistic detail to your wardrobe? Browse our range of resin lady face buttons — in matte black, from 22mm up to 30mm, with six buttons per pack — and pick the size that suits your project. Not sure which size will fit your buttonholes? Get in touch using the contact details at the bottom of this page and we will be happy to help.
Can You Buy Resin Lady Face Buttons Wholesale?
Yes. As a button manufacturer, we offer resin lady face buttons for wholesale and bulk orders, with trade pricing for boutiques, fashion brands, tailors and craft studios. Whether you are stocking a haberdashery, adding artistic details to a clothing line, or putting together DIY sewing kits, we ship factory-direct worldwide. Tell us the sizes and quantities you need, using the contact details below, and we will reply with a wholesale quote and bulk availability.
Get in Touch
Have a question about our resin lady face buttons, or want a wholesale quote? Contact our customer service team and we will be happy to help.
- Email: [email protected]
- Phone: +86 158-8823-7906
- Address: No. 163, Hanbu Road, Qiaoxia Town, Yongjia County, Wenzhou City, Zhejiang Province, China, 325106